网站地图
RSS订阅
匿名投稿
您的位置:网站首页 > 新闻中心

环氧树脂自流平地坪质量控制及技术要求

作者:上下建筑 来源:未知 日期:2014-7-28 15:41:41 人气: 标签:环氧自流平地坪
导读:环氧树脂自流平地坪质量控制及技术要求(一)基层要求1.基层表面平整.无不规则及凹凸不平。2.基层混凝土标号应≥C25,基面坚固,不起砂,无起壳,无空鼓。3.基

  环氧树脂自流平地坪质量控制及技术要求

  (一)基层要求

  1.基层表面平整.无不规则及凹凸不平。

  2.基层混凝土标号应≥C25,基面坚固,不起砂,无起壳,无空鼓。

  3.基面含水率<8%,基层应做防潮层处理。

  (二)技术要求

  1.垂直面应先施工,以免污染水平面。

  2.层间涂装间隔超过7天,基层用砂磨机粗糙化后再上底涂,可以增加其附着力。 ‘

  3.涂布抹平有气泡时,应在硬化前涂布消除气泡。

  4施工环境需防尘,封闭施工。避免在低温高湿条件下施工;涂装完成后,应充分保养才能投入使用。

  5.环氧自流平表面平整光洁、色彩一致、无明显色差。

  以上就是盐城环氧地坪公司对于“环氧树脂自流平地坪质量控制及技术要求”的简单介绍,如果您还想更进一步的了解相关知识,欢迎您来电垂询我们的地坪专家,工程部咨询热线:13235161391

  英文翻译:

  Epoxy self leveling floor quality control and technical requirements

  (a) the basic requirements

  1 of the base surface. No irregular and uneven.

  2 primary grade of concrete should be larger than C25, the base is strong, no sand, no peeling, no empty drum.

  3 the surface moisture content <8%, grass-roots should do moistureproof layer processing.

  (two) the technical requirements

  1 vertical surface should be constructed first, so as to avoid the pollution level.

  2 layer coating intervals over 7 days, with sand mill rough after the primer base, can increase the adhesion. '

  The 3 coating smooth with bubbles, should be in before hardening coating eliminates air bubbles.

  4 construction and environmental dust, closed construction. Avoid working in low temperature and high humidity conditions; after painting, should fully maintenance can be put into use.

  5 self leveling epoxy with smooth surface, uniform color, no obvious color difference.

  The above is the Yancheng epoxy flooring company to "introduce epoxy self leveling floor quality control and technical requirements", if you want to further understand the relevant knowledge, you are welcome to call us our flooring experts, keno Engineering Department Hotline:13235161391

共有:条评论信息评论信息
发表评论
姓 名:
验证码: