网站地图
RSS订阅
匿名投稿
您的位置:网站首页 > 新闻中心

解析工业彩色耐磨地坪养护知识

作者:地坪 来源:未知 日期:2017-11-7 10:00:11 人气: 标签:
导读:工业彩色耐磨地坪现在很受欢迎,彩色耐磨地坪不仅装饰美观、而且耐磨,硬度高,不易起尘砂且成本较其它地坪低等优点。The industry color wear-resisting floor 

工业彩色耐磨地坪现在很受欢迎,彩色耐磨地坪不仅装饰美观、而且耐磨,硬度高,不易起尘砂且成本较其它地坪低等优点。

 The industry color wear-resisting floor is very popular now, the color wear-resisting floor is not only beautiful, but also wear-resistant, the hardness is high, it is not easy to get dust sand and the cost is lower than other floor.

  下面是上下建筑介绍的关于彩色耐磨地坪的养护要求:

     The following is the maintenance requirements for the color wear-resisting floor of the upper and lower buildings:

  为了防止耐磨地坪表面上的水分急剧蒸发,我们应该要在彩色耐磨地坪施工完后3h-4h内涂刷专用的养护剂来进行养护,养护时间一般为7天以上,为了确保彩色耐磨材料强度的温度增长上述是在彩色耐磨地坪施工中需要注意的。

    To prevent wear-resisting floor paint on the surface of the moisture to evaporate rapidly, we should be in color wear-resisting floor construction within 3 h - 4 h after brushing special curing agent for maintenance, the maintenance time is 7 days or more commonly, in order to ensure that the temperature of the color wear-resisting material strength growth is above need to be aware of in the color wear-resisting floor construction. 

   对施工中我要严控每一道工序,对于刚施工完的彩色耐磨地坪要测其硬度、强度、如未达到要求时要严禁任何人员踏压或做其它项目的施工。

    I want to rein in the construction of every working procedure, for had just finished the construction of the color, wear resistant floors to measure the hardness, strength, such as do not meet the requirements to prohibit any personnel step pressure or do other project construction.

  拆模工序:彩色耐磨地坪材料施工完后至少要等3天后再材模,拆模时要仔细,不要损坏地面边缘部分。

    Mold removal procedure: after the construction of the color wear-resistant floor is at least 3 days after the construction of the materials, carefully, do not damage the part of the ground.

  关于进行伸缩缝切割是需要等彩色耐磨材料施工完3天后根据设计要求来进行。

  It is necessary to wait for the construction of the retractable seam to be done after 3 days after the construction of the colored wear-resistant materials.      

共有:条评论信息评论信息
发表评论
姓 名:
验证码: