网站地图
RSS订阅
匿名投稿
您的位置:网站首页 > 新闻中心

浅议机械法去除旧环氧地坪漆

作者:地坪 来源:未知 日期:2017-11-14 12:33:06 人气: 标签:
导读:环氧地坪漆需求去掉,首要触及因素:Epoxy floor paint needs to be removed, the primary touch factor:1,原有环氧地坪漆涂膜质量有疑问,呈现

环氧地坪需求去掉,首要触及因素:

Epoxy floor paint needs to be removed, the primary touch factor:
1,原有环氧地坪涂膜质量有疑问,呈现脱落,老化,开裂等影响正常运用的状况。

1. The quality of the original epoxy floor coating is in question, which can affect the normal use of the coating, such as shedding, aging and cracking.
2、环氧地坪创新,现有环氧地坪和原地上地坪漆材料抵触,无法叠加施工,必须明白。

2. Epoxy floor paint innovation, the existing epoxy floor paint and the ground floor paint resistance, cannot overlay construction, must understand.
那怎么去掉地坪漆旧涂膜了?通常选用机械除漆法。

How do you remove the old paint from the floor? Usually, mechanical depaint is selected.
常用的机械除漆法首要包含3种办法,分别是机械打磨、手艺打磨、高压水射流。而这3种办法中最多见的是机械打磨。由于机械打磨比手艺打磨快,比高压水射流完全。

The commonly used mechanical depaint method includes three methods: mechanical grinding, craft polishing, high-pressure water jet. The most common of these 3 methods is mechanical polishing. Mechanical grinding is faster than craft polishing, which is more complete than high pressure water jet.
而运用频率最高的是运用抛丸机打磨,这个办法也叫抛丸除漆法:

And the most frequent use is the use of the shot blasting machine, which is also called shot blasting method.
1、运用机械:抛丸机

1. Application of mechanical: shot blasting machine
2、长处:去掉地坪漆旧涂膜完全。

Strengths: remove the paint from the floor paint completely.
3、缺陷:简单将没损坏的旧涂膜一起打磨明白,会形成一定糟蹋。

3. Defects: it is easy to polish the old coat without damage and it will be spoilt.
4、注意事项:抛丸机是接电运作,底部是高速弹射的弹丸,假如打磨机转向时不注意打磨到电线,将会形成安全事故。

4. Precautions: the shot blasting machine is connected to the electric power, and the bottom is the projectile of high speed projectile. If the grinding machine turns without attention to the grinding to the wire, it will form a safety accident.

共有:条评论信息评论信息
发表评论
姓 名:
验证码: